Interface Atm Ima - Cisco MWR 2941 Command Reference Manual

interface atm ima

interface atm ima
To configure an ATM IMA group and enter interface configuration mode, use the interface atm ima
global configuration command. If the group does not exist when the command is issued, the command
automatically creates the group.
Syntax Description
slot
group-number
Defaults
The interface includes individual ATM links, but no IMA groups.
Command Modes
Global configuration
Command History Release
12.0(5)XK
12.0(5)T
12.0(5)XE
12.0(7)XE1
12.1(5)T
12.2(33)SRA
12.2SX
12.4(19)MR2
12.2(33)MRA
15.0(1)MR
Usage Guidelines
When a port is configured for IMA functionality, it no longer operates as an individual ATM link.
Specifying ATM links as members of a group using the ima-group interface command does not enable
the group. You must use the interface atm slot/imagroup-number command to create the group.
Examples
The following example shows the how to create the IMA group:
Router(config)# interface ATM0/IMA0
Router(config-if)# no ip address
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
176
interface atm slot/imagroup-number
Specifies the slot location of the ATM IMA port adapter.
Specifies an IMA group number from 0 to 3. You can create up to four
groups.
Modification
This command was introduced on Cisco 2600 and 3600 series routers.
This command was integrated into Cisco IOS 12.0(5)T.
Support for Cisco 7200 and 7500 series routers was added.
Support for Cisco 7100 series routers was added.
Support for Cisco 7100, 7200, and 7500 series routers was integrated into
Cisco IOS Release 12.1(5)T.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was incorporated into Cisco IOS Release 12.4(19)MR2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01