Clear Ethernet Cfm Traceroute-Cache - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

clear ethernet cfm traceroute-cache

To remove the contents of the Ethernet CFM traceroute cache, use the clear ethernet cfm
traceroute-cache command in privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History Release
12.2(33)SRA
12.4(11)T
12.2(33)SXH
12.2(33)SXI2
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use the clear ethernet cfm traceroute-cache command to remove traceroute cache entries from
previous traceroute operations issued on the device. This command also provides visibility into
maintenance intermediate points and maintenance end points of a domain as they were recorded when
the operation was performed.
Examples The following example shows the clear ethernet cfm traceroute-cache command:
Router# clear ethernet cfm traceroute-cache
Related Commands Command
ethernet cfm
traceroute cache
show ethernet cfm
traceroute-cache
OL-23890-01
clear ethernet cfm traceroute-cache
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(11)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)SXI2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Description
Enables caching of Ethernet CFM data learned through traceroute messages.
Displays the contents of the traceroute cache.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
clear ethernet cfm traceroute-cache
55