Recovered-Clock Slave - Cisco MWR 2941 Command Reference Manual

recovered-clock slave

recovered-clock slave
To configure out-of-band clock recovery, use the recovered-clock slave command. This command
automatically creates a virtual-cem interface. To access the virtual-cem interface, use the command
interface virtual-cem 0/24. To disable this feature, use the feature, use the no form of this command.
Defaults There is no default setting.
Command Modes
Global configuration
Command History Release
12.4(19)MR2
12.2(33)MRA
15.0(1)MR
Examples
The following example shows how to use the recovered-clock slave command and how to configure the
virtual-cem interface:
Router# config t
Router(config)# recovered-clock slave
Router(config-if)# interface virtual-cem 0/24
Router(config-if)# payload-size 486
Router(config-if)# cem 0
Router(config-if)# xconnect 10.10.10.2 7600 encap mpls
Router(config-if)# exit
Router(config)# exit
Related Commands Command
recovered-clock recovered
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
362
recovered-clock slave
no recovered-clock slave
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Configures adaptive clock recovery.
OL-23890-01