Cisco MWR 2941 Command Reference Manual page 176

ethernet oam link-monitor transmit-crc
Examples
The following example shows how to configure a transmit CRC window of 2500 milliseconds:
Router(config-if)# ethernet oam link-monitor transmit-crc window 25
Related Commands ethernet oam link-monitor
frame
ethernet oam link-monitor
frame-period
ethernet oam link-monitor
frame-seconds
ethernet oam link-monitor
high-threshold action
ethernet oam link-monitor
receive-crc
ethernet oam link-monitor
symbol-period
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
158
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Configures an error frame threshold or window on an Ethernet OAM
interface.
Configures an error frame period on an Ethernet OAM interface.
Configures a frame-seconds period on an Ethernet OAM interface.
Configures a specific action to occur when a high threshold for an
error is exceeded on an Ethernet OAM interface.
Configures an Ethernet OAM interface to monitor frames received
with CRC errors for a period of time.
Configures an error symbol period on an Ethernet OAM interface.
OL-23890-01