Cisco MWR 2941 Command Reference Manual page 193

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Router(config-mst)# instance 5 vlan 1100
Router(config-mst)#
The following example shows how to move a range of VLANs from instance 2 to the CIST instance:
Router(config-mst)# no instance 2 vlan 40-60
Router(config-mst)#
The following example shows how to move all the VLANs that are mapped to instance 2 back to the
CIST instance:
Router(config-mst)# no instance 2
Router(config-mst)#
Related Commands Command
name (MST
configuration mode)
revision
show
show spanning-tree
mst
spanning-tree mist
configuration
OL-23890-01
Description
Sets the name of an MST region.
Sets the revision number for the MST configuration.
Verifies the MST configuration.
Displays the information about the MST protocol.
Enters MST configuration mode.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
instance (VLAN)
175