Clear L2Protocol-Tunnel Counters - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

clear l2protocol-tunnel counters

To clear the layer 2 tunnel protocol counters on the router, use the clear l2protocol-tunnel counters
command in Exec mode.
Syntax Description GigabitEthernet
slot/port
Command Default
No default settings or behaviors.
Command Modes
EXEC (>)
Privileged EXEC (#)
Command History Release
15.0(1)MR
Usage Guidelines
This command only applies to Gigabit Ethernet interfaces.
Examples This example shows how to clear the layer 2 protocol counters for all interfaces:
Router# clear l2protocol-tunnel counters
Router#
Related Commands Command
l2protocol-tunnel
OL-23890-01
clear l2protocol-tunnel counters [GigabitEthernet slot/port]
(Optional) Specifies the a Gigabit Ethernet interface.
Slot and port number.
Modification
This command was introduced.
Description
Enables the protocol tunneling on an interface and specifies the type of
protocol to be tunneled.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
clear l2protocol-tunnel counters
57