Table of Contents
Advertisement
cns image password
cns image password
To configure a password to use with the Cisco Networking Services (CNS) image agent services, use the
cns image password command in global configuration mode. To disable the use of a password, use the
no form of this command.
Syntax Description
image-password
Command Default
No password is used with the CNS image agent services.
Command Modes
Global configuration (config)
Command History
Release
12.3(1)
12.2(31)SB2
12.2(33)SRB
12.2(33)SB
12.2(33)SXI
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use this command to create a password that is sent with the image ID in all CNS image agent messages.
The recipient of these messages can use this information to authenticate the sending device. This
password may be different from the username and password used for HTTP basic authentication
configured with other CNS image agent commands.
Examples
The following example shows how to configure a password to be used for the CNS image agent services:
Router(config)# cns image password textabc
Related Commands
Command
cns id
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
82
cns image password image-password
no cns image password image-password
Password to be used for CNS image agent services.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(31)SB2.
This command was integrated into Cisco IOS Release 12.2(33)SRB.
This command was integrated into Cisco IOS Release 12.2(33)SB.
This command was integrated into Cisco IOS Release 12.2(33)SXI.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Sets the unique event ID, config ID, or image ID used by CNS
services.
OL-23890-01
Advertisement
Table of Contents
