Period (Cfm-Ais-Link) - Cisco MWR 2941 Command Reference Manual

period (CFM-AIS-link)

period (CFM-AIS-link)
To configure a specific Alarm Indication Signal (AIS) transmission interval on a server maintenance
endpoint (SMEP), use the period command in CFM SMEP AIS configuration mode. To remove the
interval configuration, use the no form of this command.
Syntax Description seconds
Command Default AIS frames are transmitted every 60 seconds.
Command Modes CFM SMEP AIS configuration mode (config-ais-link-cfm)
Command History Release
12.2(33)SRD
15.0(1)XA
15.0(1)MR
Usage Guidelines
When the default value is configured, "period 60" is displayed when the show running all command
is issued.
Examples The following example shows how to configure an AIS transmission interval of 1 second:
Router(config)# ethernet cfm ais link-status global
Router(config-ais-link-cfm)# period 1
Related Commands Command
show running all
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
290
period seconds
no period
Integers 1 or 60 that specify the time interval, in seconds, between AIS
transmissions. The default is 60.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 15.0(1)XA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Description
Displays the running configuration with default values.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01