Ethernet Lmi Global - Cisco MWR 2941 Command Reference Manual

ethernet lmi global

ethernet lmi global
To enable Ethernet local management interface (LMI) functionality globally on a device, use the
ethernet lmi global command in global configuration mode. To disable Ethernet LMI globally on a
device, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Command Default
Ethernet LMI is disabled.
Command Modes
Global configuration (config)
Command History Release
12.4(9)T
12.2(33)SRB
12.2(33)MRA
15.0(1)MR
Usage Guidelines Ethernet LMI is disabled by default on an interface and must be explicitly enabled. The ethernet lmi
global command enables Ethernet LMI on all interfaces for an entire device. The benefit of this
command is that you can enable Ethernet LMI on all interfaces with one command compared to enabling
Ethernet LMI separately on each interface.
To disable Ethernet LMI on a specific interface after the ethernet lmi global command has been issued,
the no ethernet lmi interface command must be issued on that interface.
The sequence in which the ethernet lmi interface and ethernet lmi global commands are issued is
significant. The latest command issued overrides the prior command issued.
Examples The following example shows how to enable Ethernet LMI globally on a device:
Router(config)# ethernet lmi global
Related Commands Command
ethernet lmi interface
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
140
ethernet lmi global
no ethernet lmi global
Modification
This command was introduced.
Support for this command on the Cisco 7600 router was integrated into
Cisco IOS Release 12.2(33)SRB.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Enables Ethernet LMI for a user-network interface.
OL-23890-01