Cisco MWR 2941 Command Reference Manual page 30

ais
Examples
The following example shows how to enable the AIS function at level 5 with a transmission period of
one second:
Router(config)# ethernet cfm domain operatorA level 5
Router(config-ecfm)# service vlan-id 10 port
Router(config-ecfm-srv)# ais period 1
Router(config-ecfm-srv)# ais level 5
Related Commands Command
ethernet cfm global
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
12
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Enables connectivity fault management (CFM) globally on a device.
OL-23890-01