Cisco MWR 2941 Command Reference Manual page 219

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Examples
This example shows how to enable a tunneling protocol on an interface:
Router(config-if)# l2protocol-tunnel cdp
Router(config-if)#
This example shows how to disable a tunneling protocol on an interface:
Router(config-if)# no l2protocol-tunnel
Protocol tunneling disabled on interface fastEthernet 4/1
Router(config-if)#
Related Commands Command
show
l2protocol-tunnel
switchport
OL-23890-01
Description
Displays the protocols that are tunneled on an interface or on all interfaces.
Modifies the switching characteristics of the Layer 2-switched interface.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
l2protocol-tunnel
201