Cisco MWR 2941 Command Reference Manual page 290

network-clock quality-level
Command History Release
15.0(1)MR
Usage Guidelines
This command only applies to synchronous Ethernet interfaces.
Examples This example shows how to configure a quality-level value:
Router(config)# network-clock quality-level rx QL-DNU controller BITS
Router(config)#
Related Commands Command
network-clock
input-source
network-clock source
quality-level
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
272
Modification
This command was introduced.
Description
Selects an interface or external timing input as a clock source and sets a
priority for the clock.
Specifies a quality level for a clock source.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01