Ethernet Oam Remote-Loopback - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

ethernet oam remote-loopback

To turn on or off Ethernet operations, maintenance, and administration (OAM) remote loopback
functionality on an interface, use the ethernet oam remote-loopback command in privileged EXEC
mode. This command does not have a no form.
Syntax Description
start
stop
interface
type
number
Command Default
Remote loopback functionality is turned off.
Command Modes Privileged EXEC (#)
Command History Release
12.2(33)SRA
12.4(15)T
12.2(33)SXH
12.2(33)MRA
15.0(1)MR
Usage Guidelines There is no no form of this command.
When Ethernet OAM remote loopback functionality is enabled on an interface, traffic sent out on this
interface will be discarded or sent back (and dropped locally) by the remote interface.
Remote loopback will not function, whether or not an interface has been configured to support it, when
the no ethernet oam link-monitor supported command has been issued.
Note
Examples
The following example shows how to start a remote loopback session on interface GigabitEthernet 2/1:
Router# ethernet oam remote-loopback start interface gigabitethernet2/1
OL-23890-01
ethernet oam remote-loopback {start | stop} {interface type number}
Starts the remote loopback operation.
Stops the remote loopback operation.
Specifies an interface.
Type of Ethernet interface. Valid values are GigabitEthernet.
Integer from 1 to 9 that is the number of the Ethernet interface.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
To start Ethernet OAM remote loopback on a switch port, you must first configure the
access-group mode prefer port command in interface configuration mode.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ethernet oam remote-loopback
161