Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
You can use the optional retry and interval keywords to specify an amount of time in seconds to wait
before attempting to retrieve a configuration from a trusted server. The number of retries is restricted to
100 to prevent the configuration agent from indefinitely attempting to reach an unreachable server. Use
the keyboard combination Ctrl-Shift-6 to abort this command.
Examples
The following example shows how to request a configuration from a trusted server at 10.1.1.1:
Router(config)# cns trusted-server all 10.1.1.1
Router(config)# exit
Router# cns config retrieve 10.1.1.1
The following example shows how to request a configuration from a trusted server at 10.1.1.1 and to
configure a CNS configuration retrieve interval:
Router(config)# cns trusted-server all 10.1.1.1
Router(config)# exit
Router# cns config retrieve 10.1.1.1 retry 50 interval 1500
CNS Config Retrieve Attempt 1 out of 50 is in progress
Next cns config retrieve retry is in 1499 seconds (Ctrl-Shft-6 to abort this command).
..
00:26:40: %CNS-3-TRANSPORT: CNS_HTTP_CONNECTION_FAILED:10.1.1.1 -Process= "CNS config
retv", ipl= 0, pid= 43
00:26:40: %CNS-3-TRANSPORT: CNS_HTTP_CONNECTION_FAILED -Process= "CNS config retv", ipl=
0, pid= 43......
Related Commands
Command
cli
cns config initial
cns trusted-server
kron policy-list
show cns config status
OL-23890-01
Description
Specifies EXEC CLI commands within a Command Scheduler policy
list.
Starts the CNS configuration agent and initiates an initial
configuration.
Specifies a trusted server for CNS agents.
Specifies a name for a Command Scheduler policy and enters
kron-policy configuration mode.
Displays information about the status of the CNS configuration
agent.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns config retrieve
73
Advertisement
Table of Contents
