Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show cns config outstanding
To display information about incremental (partial) Cisco Networking Services (CNS) configurations
that have started but not yet completed, use the show cns config outstanding command in privileged
EXEC mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
Release
12.2(2)T
12.2(8)T
12.2(33)SB
12.2(33)SXI
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use the show cns config outstanding command to display information about outstanding incremental
(partial) configurations that have started but not yet completed, including the following:
•
•
•
Examples
The following is sample output from the show cns config outstanding command:
Router# show cns config outstanding
The outstanding configuration information:
queue id
1
Related Commands
Command
cns config cancel
config-cli
show cns config stats
OL-23890-01
show cns config outstanding
Modification
This command was introduced.
This command was implemented on Cisco 2600 series and Cisco 3600 series
routers.
This command was integrated into Cisco IOS Release 12.2(33)SB.
This command was integrated into Cisco IOS Release 12.2(33)SXI.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Queue ID (location of configuration in the config queue)
Identifier (group ID)
Config ID (identity of configuration within the group)
identifier
identifierREAD
Description
Cancels an incremental two-phase synchronization configuration.
Displays the status of the CNS event agent connection.
Displays statistics about the CNS configuration agent.
config-id
config_idREAD
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show cns config outstanding
469
Advertisement
Table of Contents
