Cisco MWR 2941 Command Reference Manual page 148

ethernet cfm mip
Release
12.2(33)SRE
15.0(1)MR
Usage Guidelines
MIPs will be provisioned only if all the policies have been met.
This command has lower precedence than the manual MIP ethernet cfm mip level (interface
configuration mode) configuration command. For example, if you manually configure a MIP for a
particular MA, that configuration overrides the MIP created by the global ethernet cfm mip command
for that MA.
Examples
The following example shows how to dynamically create a MIP at maintenance level 6 and configure
VLAN 500 if a MEP is configured at the next lower active maintenance domain level for the VLAN ID
on the port:
Router(config)# ethernet cfm mip auto-create level 6 vlan 500 lower-mep-only
Related Commands Command
cfm mip level
ethernet cfm mip level
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
130
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Modification
This command was integrated into Cisco IOS Release 12.2(33)SRE.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Description
Sets a port as internal to a maintenance domain, and defines it as a
MIP for a MA.
Sets a port as internal to a maintenance domain, and defines it as a
MIP.
OL-23890-01