Ethernet Oam Link-Monitor Frame - Cisco MWR 2941 Command Reference Manual

ethernet oam link-monitor frame

ethernet oam link-monitor frame
To configure an error frame threshold or window on an Ethernet operations, maintenance, and
administration (OAM) interface, use the ethernet oam link-monitor frame command in configuration
template mode or interface configuration mode. To remove the threshold or window, use the no form of
this command.
Syntax Description
threshold
high
none
high-frames
low
low-frames
window
milliseconds
Command Default The ethernet oam link-monitor frame command is not configured.
Command Modes
Configuration template (config-template)
Interface configuration (config-if)
Command History Release
12.2(33)SRA
12.4(15)T
12.2(33)SXH
12.2(33)MRA
15.0(1)MR
Usage Guidelines The ethernet oam link-monitor frame command configures a number of error frames that triggers an
action or a period of time in which error frames are counted.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
144
ethernet oam link-monitor frame {threshold {high {none | high-frames} | low low-frames} |
window milliseconds}
no ethernet oam link-monitor frame {threshold {high | low} | window}
Sets a number of error frames at, above, or below which an action is
triggered.
Sets a high error frame threshold in number of frames.
Disables a high threshold.
Integer in the range of 1 to 65535 that is the high threshold in number of
frames.
Sets a low error frame threshold.
Integer in the range of 0 to 65535 that sets the low threshold in number of
frames. The default is 1.
Sets a window and period of time during which error frames are counted.
Integer in the range of 10 to 600 that represents a number of milliseconds in
a multiple of 100. The default is 100.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01