Match Mpls Experimental - Cisco MWR 2941 Command Reference Manual

match mpls experimental

match mpls experimental
To configure a class map to use the specified value or values of the experimental (EXP) field as a match
criteria, use the match mpls experimental command in class-map configuration mode. To remove the
EXP field match criteria from a class map, use the no form of this command.
Syntax Description number
Command Default
No match criteria are specified.
Command Modes
Class-map configuration
Command History Release
12.0(7)XE1
12.1(1)E
12.1(5)T
12.2(4)T
12.2(4)T2
12.2(33)SRA
12.2(31)SB
12.2SX
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
For class-based weighted fair queueing (CBWFQ), you define traffic classes based on match criteria
such as input interfaces, access control lists (ACLs), protocols, quality of service (QoS) labels, and
experimental (EXP) field values. Packets satisfying the match criteria for a class constitute the traffic
for that class.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
226
match mpls experimental number
no match mpls experimental number
EXP field value (any number from 0 through 7) to be used as a match
criterion. You can specify multiple values, separated by a space (for
example, 3 4 7).
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.1(1)E.
This command was integrated into Cisco IOS Release 12.1(5)T.
This command was implemented on the Cisco MGX 8850 switch and the
MGX 8950 switch with a Cisco MGX RPM-PR card.
This command was implemented on the Cisco 7500 series.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(31)SB and
implemented on the Cisco 10000 series.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01