Cisco MWR 2941 Command Reference Manual page 286

network-clock output-source
Defaults
Clocking output is disabled by default.
Command Modes
Global configuration (config)
Command History Release
15.0(1)MR
Usage Guidelines The router selects clock output interfaces based on the priority value of the clock output source.
Examples
This example shows how to configure an output clock source:
Router(config)# network-clock output-source 10 10m
Router(config)#
Related Commands Command
network-clock
input-source
network-clock
output-source line
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
268
Modification
This command was introduced.
Description
Selects an interface or external timing input as a clock source and sets a
priority for the clock.
Transmits clocking received from an external source to another external
device using timing output interfaces.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01