Cisco MWR 2941 Command Reference Manual page 546

show ethernet oam status
Low threshold:
High threshold:
Frame Error
Window:
Low threshold:
High threshold:
Frame Period Error
Window:
Low threshold:
High threshold:
Frame Seconds Error
Window:
Low threshold:
High threshold:
Table 35
Table 35
Field
General
Mode
PDU max rate
PDU min rate
Link timeout
High threshold action
Link Monitoring
Status
Symbol Period Error
Window
Low threshold
High threshold
Frame Error
Window
Low threshold
High threshold
Frame Period Error
Window
Low threshold
High threshold
Frame Seconds Error
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
528
1 error symbol(s)
none
10 x 100 milliseconds
1 error frame(s)
none
1 x 100,000 frames
1 error frame(s)
none
600 x 100 milliseconds
1 error second(s)
none
describes the significant fields shown in the display.
show ethernet oam status Field Descriptions
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Active or passive mode of the interface.
Maximum number of protocol data units (PDUs) transmitted
per second.
Minimum number of PDUs transmitted per second.
Amount of time with inactivity before the link is dropped.
Action that occurs when the high threshold for an error is
exceeded.
Operational state of the port.
Specified number of error symbols.
Minimum number of error symbols.
Maximum number of error symbols.
Specified amount of time in milliseconds.
Minimum number of error frames.
Maximum number of error frames.
Frequency at which the measurement is taken, in
milliseconds.
Minimum number of error frames.
Maximum number of error frames.
OL-23890-01