Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
The number of frames polled is user defined. Note that the system can poll only by time, not by frames.
The number of frames you specify is converted internally to seconds using a formula that includes
interface speed.
Examples
The following example shows how to configure an Ethernet OAM link-monitor frame-period window
of 20000 frames:
Router(config-template)# ethernet oam link-monitor frame-period window 2
The following example shows how to configure an Ethernet OAM link-monitor frame-period low
threshold of 500 frames:
Router(config-template)# ethernet oam link-monitor frame-period threshold low 500
Related Commands
ethernet oam link-monitor
frame
ethernet oam link-monitor
frame-seconds
ethernet oam link-monitor
high-threshold action
ethernet oam link-monitor
receive-crc
ethernet oam link-monitor
symbol-period
ethernet oam link-monitor
transmit-crc
OL-23890-01
Configures an error frame threshold or window on an Ethernet OAM
interface.
Configures a frame-seconds period on an Ethernet OAM interface.
Configures a specific action to occur when a high threshold for an
error is exceeded on an Ethernet OAM interface.
Configures an Ethernet OAM interface to monitor frames received
with CRC errors for a period of time.
Configures an error symbol period on an Ethernet OAM interface.
Configures an Ethernet OAM interface to monitor frames transmitted
with CRC errors for a period of time.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ethernet oam link-monitor frame-period
147
Advertisement
Table of Contents
