Cisco MWR 2941 Command Reference Manual page 603

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Match: any
The two-rate traffic policer marks 500 kbps of traffic as conforming, 500 kbps of traffic as exceeding,
and 250 kbps of traffic as violating the specified rate. Packets marked as conforming will be sent as is,
and packets marked as exceeding will be marked with IP Precedence 2 and then sent. Packets marked as
violating the specified rate are dropped.
Table 51
Table 51
Field
police
conformed
exceeded
violated
Multiple Traffic Policing Actions: Example
The following is sample output from the show policy-map command when the Policer
Enhancement—Multiple Actions feature has been configured. The sample output from the show
policy-map interface command displays the statistics for the serial 3/2 interface, to which a service
policy called "police" (configured as shown below) is attached.
policy-map police
class class-default
police cir 1000000 pir 2000000
Router# show policy-map interface serial3/2
Serial3/2: DLCI 100 -
Service-policy output: police
Class-map: class-default (match-any)
exceeded 59549 packets, 14649054 bytes; actions:
OL-23890-01
describes the significant fields shown in the display.
show policy-map interface Field Descriptions—Configured for Two-Rate Traffic
Policing
Description
Indicates that the police command has been configured to enable traffic policing.
Also, displays the specified CIR, conform burst size, peak information rate (PIR),
and peak burst size used for marking packets.
Displays the action to be taken on packets conforming to a specified rate. Displays
the number of packets and bytes on which the action was taken.
Displays the action to be taken on packets exceeding a specified rate. Displays the
number of packets and bytes on which the action was taken.
Displays the action to be taken on packets violating a specified rate. Displays the
number of packets and bytes on which the action was taken.
conform-action transmit
exceed-action set-prec-transmit 4
exceed-action set-frde-transmit
violate-action set-prec-transmit 2
violate-action set-frde-transmit
172984 packets, 42553700 bytes
5 minute offered rate 960000 bps, drop rate 277000 bps
Match: any
police:
cir 1000000 bps, bc 31250 bytes, pir 2000000 bps, be 31250 bytes
conformed 59679 packets, 14680670 bytes; actions:
transmit
set-prec-transmit 4
set-frde-transmit
violated 53758 packets, 13224468 bytes; actions:
set-prec-transmit 2
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show policy-map interface
585