Defining Ip Parameters; Gateway Addresses; Network Server Ip Addresses - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
Item
Power Cables
4.2

Defining IP Parameters

The tables below detail the parameters that the customer must provide as preparation
for the installation procedures.
Note 1: The tables in this section provide fields in which you can fill in the relevant
information.
Note 2: A list of the MAC addresses of the systems' boards should be provided
with the product documentation. However, the MAC Address field in the
table below is provided for your convenience.
Note: The PC should be in the same subnet as that of the Avaya G860 Media
Gateway components that communicate with the PC.
4.2.1

Gateway Addresses

If the network requires a Single IP configuration, use the Single IP Configuration
column in the table below. If the network includes 3 subnets, use the 3 Subnets -
OAM, Media and Control network columns in the table below:
Single IP
Network
Configuration
IP Address
Subnet Mask
Default
Gateway
Router
4.2.2

Network Server IP Addresses

For the relevant Network Servers, prepare the following information:
50 Installation & Operation Manual
Table 24: Cabling Requirements
Requirement
Use 14 AWG stranded wiring for hook up to local power source
(Refer to 'Connecting System Power' on page 67.)
Table 25: Gateway Addresses
3 Subnets
OAM Network Media Network Control Network