ZyXEL Communications ZyWALL USG 200 Series User Manual page 609

signatures by criteria such as name, ID, severity, attack type, vulnerable attack
platforms, service category, log options or actions.
Figure 433 Configuration > Anti-X > IDP > Profile: Query View
The following table describes the fields specific to this screen's query view.
Table 165 Configuration > Anti-X > IDP > Profile: Query View
LABEL
Name
Switch to group
view
Query
Signatures
Search all
custom
signatures
Name
Signature
ID
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This is the name of the profile that you created in the IDP > Profiles >
Group View screen.
Click this button to go to the IDP profile group view screen where IDP
signatures are grouped by service and you can configure activation, logs
and/or actions.
Select the criteria on which to perform the search.
Select this check box to search for signatures you created or imported in
the Custom Signatures screen. You can search by name or ID. If the
name and ID fields are left blank, then all custom signatures are
displayed.
Type the name or part of the name of the signature(s) you want to find.
Type the ID or part of the ID of the signature(s) you want to find.
Chapter 34 IDP
609