Active Directory Or Ldap Server Summary; Adding An Active Directory Or Ldap Server - ZyXEL Communications ZyWALL USG 200 Series User Manual

• See Section 7.8 on page 155
authenticate user accounts based on groups.

44.2 Active Directory or LDAP Server Summary

Use the Active Directory or LDAP screen to manage the list of AD or LDAP
servers the ZyWALL can use in authenticating users.
Click Configuration > Object > AAA Server > Active Directory (or LDAP) to
display the Active Directory (or LDAP) screen.
Figure 508 Configuration > Object > AAA Server > Active Directory (or LDAP)
The following table describes the labels in this screen.
Table 212 Configuration > Object > AAA Server > Active Directory (or LDAP)
LABEL
Add
Edit
Remove
Object
References
#
Server
Address
Base DN

44.2.1 Adding an Active Directory or LDAP Server

Click Object > AAA Server > Active Directory (or LDAP) to display the Active
Directory (or LDAP) screen. Click the Add icon or an Edit icon to display the
ZyWALL USG 100/200 Series User's Guide
for an example of how to use a RADIUS server to
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field displays the index number.
This is the address of the AD or LDAP server.
This specifies a directory. For example,
Chapter 44 AAA Server
Section 13.3.2 on page 306
.
o=ZyXEL, c=US
for
759