Anti-Virus Black List Or White List Add/Edit - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 33 Anti-Virus
The following table describes the labels in this screen.
Table 154 Configuration > Anti-X > Anti-Virus > Black/White List > Black List
LABEL
Enable Black
List
Add
Edit
Remove
Activate
Inactivate
Status
#
File Pattern
Apply
Reset

33.4 Anti-Virus Black List or White List Add/Edit

From the Configuration > Anti-X > Anti-Virus > Black/White List > Black
List (or White List) screen, click the Add icon or an Edit icon to display the
following screen.
• For a black list entry, enter a file pattern that should cause the ZyWALL to log
and delete a file.
• For a white list entry, enter a file pattern that should cause the ZyWALL to allow
a file.
Figure 425 Configuration > Anti-X > Anti-Virus > Black/White List > Black List (or
White List) > Add
588
DESCRIPTION
Select this check box to log and delete files with names that match the
black list patterns. Use the black list to log and delete files with names
that match the black list patterns.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
This is the entry's index number in the list.
This is the file name pattern. If a file's name that matches this pattern,
the ZyWALL logs and deletes the file.
Click Apply to save your changes.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 100/200 Series User's Guide