User Summary Screen; User Add/Edit Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 40 User/Group

40.2 User Summary Screen

The User screen provides a summary of all user accounts. To access this screen,
login to the Web Configurator, and click Configuration > Object > User/Group.
Figure 485 Configuration > Object > User/Group
The following table describes the labels in this screen.
Table 193 Configuration > Object > User/Group
LABEL
Add
Edit
Remove
Object
References
#
User Name
Description

40.2.1 User Add/Edit Screen

The User Add/Edit screen allows you to create a new user account or edit an
existing one.
40.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
724
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field is a sequential value, and it is not associated with a specific
user.
This field displays the user name of each user.
This field displays the description for each user.
Section 13.3.2 on page 306
ZyWALL USG 100/200 Series User's Guide
for