Set Up The Wireless Clients To Use The Wlan Interface - ZyXEL Communications ZyWALL USG 200 Series User Manual

Turn on the wireless LAN and click Apply.
3
Figure 74 Configuration > Network > Interface > WLAN

7.4.3 Set Up the Wireless Clients to Use the WLAN Interface

The following sections show you how to have a wireless client (not included with
the ZyWALL) use the wireless network.
7.4.3.1 Configure the ZyXEL Wireless Client Utility
This example covers how to configure ZyXEL's wireless client utility (not included
with the ZyWALL) to use the WLAN interface. See
instead for how to use Funk Odyssey's wireless client software if you want the
wireless client to validate the ZyWALL's certificate (for added protection against
connecting to a rogue AP).
ZyWALL USG 100/200 Series User's Guide
Chapter 7 Tutorials
Section 7.4.3.2 on page 133
129