How To Allow Public Access To A Web Server - ZyXEL Communications ZyWALL USG 200 Series User Manual

Click Configuration > Firewall > Add.
1
In the From field select WAN.
In the To field select LAN1.
Configure a name for the rule (WAN-to-LAN_H323 here).
Set the Destination to the H.323 device's LAN1 IP address object (LAN_H323).
LAN_H323 is the destination because the ZyWALL applies NAT to traffic before
applying the firewall rule.
Set the Service to H.323.
Click OK.
Figure 129 Configuration > Firewall > Add

7.12 How to Allow Public Access to a Web Server

This is an example of making an HTTP (web) server in the DMZ zone accessible
from the Internet (the WAN zone). In this example you have public IP address
1.1.1.1 that you will use on the wan2 interface and map to the HTTP server's
private IP address of 192.168.3.7.
Figure 130 Public Server Example Network Topology
192.168.3.7
ZyWALL USG 100/200 Series User's Guide
DMZ
1.1.1.1
Chapter 7 Tutorials
167