Policy Route Edit Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

15.2.1 Policy Route Edit Screen

Click Configuration > Network > Routing to open the Policy Route screen.
Then click the Add or Edit icon to open the Policy Route Edit screen. Use this
screen to configure or edit a policy route.
Figure 299 Configuration > Network > Routing > Policy Route > Add
The following table describes the labels in this screen.
Table 91 Configuration > Network > Routing > Policy Route > Edit
LABEL
Create new
Object
Configuration
Enable
Description
Criteria
User
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Use this to configure any new settings objects that you need to use in
this screen.
Select this to activate the policy.
Enter a descriptive name of up to 31 printable ASCII characters for the
policy.
Select a user name or user group from which the packets are sent.
Chapter 15 Policy and Static Routes
383