Chapter 44 AAA Server
following screen. Use this screen to create a new AD or LDAP entry or edit an
existing one.
Figure 509 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
The following table describes the labels in this screen.
Table 213 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
LABEL
Name
Description
Server Address
Backup Server
Address
Port
760
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for
identification purposes.
Enter the description of each server, if any. You can use up to 60
printable ASCII characters.
Enter the address of the AD or LDAP server.
If the AD or LDAP server has a backup server, enter its address here.
Specify the port number on the AD or LDAP server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
This port number should be the same on all AD or LDAP server(s) in this
group.
ZyWALL USG 100/200 Series User's Guide