ZyXEL Communications ZyWALL USG 200 Series User Manual page 584

Chapter 33 Anti-Virus
Table 152 Configuration > Anti-X > Anti-Virus > General (continued)
LABEL
Protocol
License
License
Status
License Type
Apply new
Registration
Signature
Information
Anti-Virus
Engine Type
Current
Version
Signature
Number
Released
Date
Update
Signatures
Apply
Reset
584
DESCRIPTION
These are the protocols of traffic to scan for viruses.
FTP applies to traffic using the TCP port number specified for FTP in the
ALG screen.
HTTP applies to traffic using TCP ports 80, 8080 and 3128.
SMTP applies to traffic using TCP port 25.
POP3 applies to traffic using TCP port 110.
IMAP4 applies to traffic using TCP port 143.
The following fields display information about the current state of your
subscription for virus signatures.
This field displays whether a service is activated (Licensed) or not (Not
Licensed) or expired (Expired).
This field displays whether you applied for a trial application (Trial) or
registered a service with your iCard's PIN number (Standard). None
displays when the service is not activated.
This link appears if you have not registered for the service or only have
the trial registration. Click this link to go to the screen where you can
register for the service.
The following fields display information on the current signature set that
the ZyWALL is using.
This field displays whether the ZyWALL is set to use ZyXEL's anti-virus
engine or the one powered by Kaspersky.
Upgrading the ZyWALL to firmware version 2.11 and updating the anti-
virus signatures automatically upgrades the ZyXEL anti-virus engine to
v2.0. v2.0 has more virus signatures and offers improved non-
executable file scan throughput.
This field displays the anti-virus signature set version number. This
number gets larger as the set is enhanced.
This field displays the number of anti-virus signatures in this set.
This field displays the date and time the set was released.
Click this link to go to the screen you can use to download signatures
from the update server.
Click Apply to save your changes.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 100/200 Series User's Guide