Configuring The Default L2Tp Vpn Connection Example - ZyXEL Communications ZyWALL USG 200 Series User Manual

8.3 Configuring the Default L2TP VPN
Connection Example
Click Configuration > VPN > Network > IPSec VPN to open the screen that
1
lists the VPN connections. Double-click the Default_L2TP_VPN_Connection
entry.
Click the Show Advanced Settings button. Configure and enforce the local and
2
remote policies.
• Create an address object that uses host type and contains the My Address IP
address that you configured in the Default_L2TP_VPN_GW. The address
object in this example uses the wan1 interface's IP address (172.16.1.2) and
is named L2TP_IFACE.
• Set the Application Scenario to Remote Access (Server Role).
• Set the Local Policy to use L2TP_IFACE.
• Click OK.
Figure 155 Configuration > VPN > IPSec VPN > VPN Connection > Edit
ZyWALL USG 100/200 Series User's Guide
Chapter 8 L2TP VPN Example
187