Adp; Overview; Chapter 35 Adp; Adp And Idp Comparison - ZyXEL Communications ZyWALL USG 200 Series User Manual

C
H A P T E R

35.1 Overview

This chapter introduces ADP (Anomaly Detection and Prevention), anomaly
profiles and applying an ADP profile to a traffic direction. ADP protects against
anomalies based on violations of protocol standards (RFCs – Requests for
Comments) and abnormal flows such as port scans.

35.1.1 ADP and IDP Comparison

ADP anomaly detection is in general effective against abnormal behavior while IDP
1
packet inspection signatures are in general effective for known attacks (see
Chapter 34 on page 595
ADP traffic and anomaly rules are updated when you upload new firmware. This is
2
different from the IDP packet inspection signatures and the system protect
signatures you download from myZyXEL.com.

35.1.2 What You Can Do in this Chapter

• Use Anti-X > ADP > General
detection on or off and apply anomaly profiles to traffic directions.
• Use Anti-X > ADP > Profile
edit an existing profile or delete an existing profile.

35.1.3 What You Need To Know

Traffic Anomalies
Traffic anomaly rules look for abnormal behavior or events such as port scanning,
sweeping or network flooding. It operates at OSI layer-2 and layer-3. Traffic
anomaly rules may be updated when you upload new firmware.
ZyWALL USG 100/200 Series User's Guide
for information on packet inspection).
(Section 35.2 on page
(Section 35.3 on page
35

ADP

631) to turn anomaly
632) to add a new profile,
629