ZyXEL Communications ZyWALL USG 100 Release Note
Zyxel zywall usg 100 gateways: release note
Hide thumbs
Also See for ZyWALL USG 100:
- User manual (922 pages) ,
- Quick start manual (128 pages) ,
- Specifications (4 pages)
Related Manuals for ZyXEL Communications ZyWALL USG 100
Summary of Contents for ZyXEL Communications ZyWALL USG 100
- Page 1 ZyXEL Firmware Release Note ZyWALL USG 100 Release 2.10(AQQ.0) Date: April 2, 2008 Author: Kevin Chiang Project Leader: Kevin Chiang 1/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.
-
Page 2: Supported Platforms
File name : 210AQQ0C0.db Purpose: This binary file contains default system signatures. Note: The file is only needed when doing system recovery from damage. File name : 210AQQ0C0.doc Purpose: This release file. 2/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. -
Page 3: Read Me First
Purpose: This file contains the Application support list by ZyWALL ZLD AppPatrol module. File name : firmware.xml Purpose: This file is needed by ZyXEL Centralized Network Management (CNM) 3.0 or after. Read Me First 1. The system default configuration is summarized as below: The default device administration username is “admin”, password is “1234”. - Page 4 7. If there is problem to reboot successfully after firmware upgrade, please refer to Appendix 3: Firmware Recovery. 4/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.
-
Page 5: Known Issues
2. [SPR: 080225768] [Symptom] “Device Profile” may not work when the authentication is required by ISP. [Workaround] Use “Custom Profile” instead. 3. [SPR: 080310472] © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 5/18... -
Page 6: Connectivity Check
[Symptom] Dial in service can’t work with ISDN device. 2. [SPR: 070112671] [Symptom] After remote modem logout CLI terminal, local modem will not drop connection immediately. It will drop connection after 20 seconds. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. Network Interface Status, and in... -
Page 7: Ipsec Vpn
4. [SPR: 080313799] [Symptom] The local ID of VPN Phase 1 is not correct when you configure it by IPSec VPN Wizard and uses the FQDN in the security gateway. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 7/18... -
Page 8: Log System
[Workaround] This bug is happened on OWA2003 SP1 with IE7 only. Use IE6 instead 4. [SPR: 070517901] [Symptom] In CIFS, filename will error after downloading a file with Chinese name and no file extension when browser is IE © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 8/18... - Page 9 AAA server in AAA method, the authentication result depends on what the former AAA server is. If the former server is Radius, the authentication would be granted, otherwise, it would be rejected. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 9/18...
-
Page 10: Wireless Lan
[Workaround] Change any settings in WLAN general page, and re-apply again. 3. [SPR: 080314880] [Symptom] If there is a wireless client associates DUT with 802.11b, then DUT will crash after changed DUT 802.11 mode from 802.11b/g to 802.11b. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. Interface WLAN General... - Page 11 Features: Modifications in 2.10(AQQ.0) - 2008/04/02 First release. 11/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.
-
Page 12: Appendix 1. Firmware Upgrade / Downgrade Procedure
Click Maintenance > File Manager > Configuration File to open the Configuration File screen. Use the Configuration File screen to backup current configuration file. Find firmware at www.zyxel.com in a file that (usually) uses the system model name with the .bin extension, for example, “210AQQ0C0.bin”. - Page 13 “LAN2” zone with “WLAN”, and “lan2” interface with “ext-wlan” in this file (case sensitive). After upgrade finished, user can upload and apply this file to restore previous settings. 13/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.
-
Page 14: Appendix 2. Snmpv2 Private Mibs Support
SNMPv2 private MIBs provides user to monitor ZyWALL platform status. If user wants to use this feature, you must prepare the following step: 1. Have ZyWALL mib files (zywall.mib and zyxel-zywall-ZLD-Common.mib ) and install to your MIBs application (like MIB-browser). You can see zywallZLDCommon (OLD is 1.3.6.1.4.1.890.1.6.22). -
Page 15: Appendix 3. Firmware Recovery
Booting failed, device show error code while uncompressing “Recovery Image”. Device reboot infinitely. Nothing displays after “Press any key to enter debug mode within 3 seconds.” for more than1 minute. Startup message displays “Invalid Recovery Image”. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 15/18... - Page 16 Answer ‘Y’ and start to upload “recovery image” via Xmodem. Use the Xmodem feature of terminal emulation software to upload the file. Wait for about 3.5 minutes until finishing Xmodem. © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved. 16/18...
- Page 17 Set the transfer mode to binary. Use “bin” (or just “bi” in the Windows command prompt). Transfer the firmware file from your computer to the ZyWALL (the command is “put 1.01(XL.0)C0.bin” in the Windows command prompt). Wait for the file transfer to complete. 17/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.
- Page 18 The console session displays “done” when the firmware recovery is complete. Then the ZyWALL automatically restarts. The username prompt displays after the ZyWALL starts up successfully. The firmware recovery process is now complete and the ZyWALL is ready to use. 18/18 © Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.