ZyXEL Communications ZyWALL USG 200 Series User Manual page 967

Table 292 Policy Route Logs (continued)
LOG MESSAGE
The policy route %d
uses empty user group!
The policy route %d
uses empty source
address group!
The policy route %d
uses empty destination
address group!
The policy route %d
uses empty service
group
Policy-route rule %d
was inserted.
Policy-route rule %d
was appended.
Policy-route rule %d
was modified.
Policy-route rule %d
was moved to %d.
Policy-route rule %d
was deleted.
Policy-route rules
were flushed.
BWM has been
activated.
BWM has been
deactivated.
Table 293 Built-in Services Logs
LOG MESSAGE
User on %u.%u.%u.%u
has been denied access
from %s
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Rules is inserted into system.
%d: the policy route rule number
Rules is appended into system.
%d: the policy route rule number
Rule is modified.
%d: the policy route rule number
Rule is moved.
1st %d: the original policy route rule number
2nd %d: the new policy route rule number
Rule is deleted.
%d: the policy route rule number
Policy routing rules are cleared.
The global setting for bandwidth management on the ZyWALL
has been turned on.
The global setting for bandwidth management on the ZyWALL
has been turned off.
DESCRIPTION
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device
was denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
Appendix A Log Descriptions
967