The Http Redirect Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

• a application patrol rule to allow HTTP traffic between dmz and wan1.
• a policy route to forward HTTP traffic from proxy server A to the Internet.
Finding Out More
See Section 6.5.11 on page 105

20.2 The HTTP Redirect Screen

To configure redirection of a HTTP request to a proxy server, click Configuration
> Network > HTTP Redirect. This screen displays the summary of the HTTP
redirect rules.
Note: You can configure up to one HTTP redirect rule for each (incoming) interface.
Figure 322 Configuration > Network > HTTP Redirect
The following table describes the labels in this screen.
Table 108 Configuration > Network > HTTP Redirect
LABEL
Add
Edit
Remove
Activate
Inactivate
#
Status
Name
Interface
Proxy Server
ZyWALL USG 100/200 Series User's Guide
for related information on these screens.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific
entry.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This is the descriptive name of a rule.
This is the interface on which the request must be received.
This is the IP address of the proxy server.
Chapter 20 HTTP Redirect
429