ZyXEL Communications ZyWALL USG 200 Series User Manual page 982

Appendix A Log Descriptions
Table 297 Routing Protocol Logs (continued)
LOG MESSAGE
Invalid OSPF virtual-
link %s authentication
of area %s.
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF text
authentication on
interface %s.
Interface %s does not
belong to any OSPF
area.
Invalid OSPF
authentication of area
%s on interface %s.
Table 298 NAT Logs
LOG MESSAGE
The NAT range is full
%s FTP ALG has
succeeded.
Extra signal port of
FTP ALG has been
modified.
Signal port of FTP ALG
has been modified.
%s H.323 ALG has
succeeded.
Extra signal port of
H.323 ALG has been
modified.
Signal port of H.323
ALG has been modified.
%s SIP ALG has
succeeded.
Extra signal port of
SIP ALG has been
modified.
Signal port of SIP ALG
has been modified.
Register SIP ALG extra
port=%d failed.
982
DESCRIPTION
Virtual-link %s authentication has been set to same-as-area
but the area has invalid authentication configuration. %s:
Virtual-Link ID
Invalid OSPF md5 authentication is set on interface %s. %s:
Interface Name
Invalid OSPF text authentication is set on interface %s. %s:
Interface Name
Interface %s has been set OSPF authentication same-as-
area, however the interface does not belong to any OSPF
area. %s: Interface Name
Interface %s has been set OSPF authentication same-as-
area, however the area has invalid text authentication
configuration. %s: Interface Name
DESCRIPTION
The NAT mapping table is full.
The FTP Application Layer Gateway (ALG) has been turned on
or off.
%s: Enable or Disable
Extra FTP ALG port has been changed.
Default FTP ALG port has been changed.
The H.323 ALG has been turned on or off. %s: Enable or
Disable
Extra H.323 ALG port has been changed.
Default H.323 ALG port has been changed.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra SIP ALG port has been changed.
Default SIP ALG port has been changed.
SIP ALG apply additional signal port failed.
%d: Port number
ZyWALL USG 100/200 Series User's Guide