User Aware Login Example - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 40 User/Group

40.4.2 User Aware Login Example

Access users cannot use the Web Configurator to browse the configuration of the
ZyWALL. Instead, after access users log into the ZyWALL, the following screen
appears.
Figure 491 Web Configurator for Non-Admin Users
The following table describes the labels in this screen.
Table 199 Web Configurator for Non-Admin Users
LABEL
User-defined
lease time
(max ...
minutes)
Renew
Updating lease
time
automatically
Remaining
time before
lease timeout
Remaining
time before
auth. timeout
734
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one
that you specified. The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of
time remaining before the ZyWALL automatically logs them out. The
ZyWALL sets this amount of time according to the
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see
on page 724)
• Lease time field in the Setting screen (see
729)
This box appears if you checked the Allow renewing lease time
automatically box in the Setting screen. (See
729.) Access users can select this check box to reset the lease time
automatically 30 seconds before it expires. Otherwise, access users have
to click the Renew button to reset the lease time.
This field displays the amount of lease time that remains, though the
user might be able to reset it.
This field displays the amount of time that remains before the ZyWALL
automatically logs the access user out, regardless of the lease time.
Section 40.4 on page
Section 40.4 on page
ZyWALL USG 100/200 Series User's Guide
Section 40.2.1