ZyXEL Communications ZyWALL USG 200 Series User Manual page 949

Table 284 User Logs
LOG MESSAGE
%s %s from %s has
logged in ZyWALL
%s %s from %s has
logged out ZyWALL
%s %s from %s has been
logged out ZyWALL (re-
auth timeout)
%s %s from %s has been
logged out ZyWALL
(lease timeout)
%s %s from %s has been
logged out ZyWALL (idle
timeout)
Console has been put
into lockout state
Address %u.%u.%u.%u has
been put into lockout
state
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
A user logged into the ZyWALL.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP,
HTTPS, FTP, Telnet, SSH, or console).
A user logged out of the ZyWALL.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP,
HTTPS, FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to a re-
authentication timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP,
HTTPS, FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to a lease
timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP,
HTTPS, FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to an idle
timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP,
HTTPS, FTP, Telnet, SSH, or console).
Too many failed login attempts were made on the console
port so the ZyWALL is blocking login attempts on the
console port.
Too many failed login attempts were made from an IP
address so the ZyWALL is blocking login attempts from that
IP address.
%u.%u.%u.%u: the source address of the user's login
attempt
Appendix A Log Descriptions
949