ZyXEL Communications ZyWALL USG 200 Series User Manual page 919

I uploaded a logo to display on the upper left corner of the Web Configurator login
screen and access page but it does not display properly.
Make sure the logo file is a GIF, JPG, or PNG of 100 kilobytes or less.
I uploaded a logo to use as the screen or window background but it does not
display properly.
Make sure the logo file is a GIF, JPG, or PNG of 100 kilobytes or less.
The ZyWALL's traffic throughput rate decreased after I started collecting traffic
statistics.
Data collection may decrease the ZyWALL's traffic throughput rate.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use "#" or "!" as the first character of a
command line to have the ZyWALL treat the line as a comment.
• Your configuration files or shell scripts can use "exit" or a command line
consisting of a single "!" to have the ZyWALL exit sub command mode.
• Include write commands in your scripts. Otherwise the changes will be lost
when the ZyWALL restarts. You could use multiple write commands in a long
script.
Note: "exit" or "!'" must follow sub commands if it is to make the ZyWALL exit sub
command mode.
See Chapter 52 on page 879
ZyWALL USG 100/200 Series User's Guide
for more on configuration files and shell scripts.
Chapter 56 Troubleshooting
919