ZyXEL Communications ZyWALL USG 200 Series User Manual page 993

Table 305 File Manager Logs (continued)
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
Resetting system...
System resetted. Now
apply %s..
Running %s...
Table 306 DHCP Logs
LOG MESSAGE
Can't find any lease for
this client - %s, DHCP
pool full!
DHCP server offered %s
to %s(%s)
Requested %s from
%s(%s)
No applicable lease found
for DHCP request - %s !
DHCP released %s with
%s(%s)
Sending ACK to %s
DHCP server assigned %s
to %s(%s)
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Run script failed, this log will be what wrong CLI command is
and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Before apply configuration file.
After the system reset, it started to apply the configuration
file.
%s is configuration file name.
An administrator ran the listed shell script.
%s is script file name.
DESCRIPTION
All of the IP addresses in the DHCP pool are already assigned
to DHCP clients, so there is no IP address to give to the listed
DHCP client.
The DHCP server feature gave the listed IP address to the
computer with the listed hostname and MAC address.
The ZyWALL received a DHCP request for the specified IP
address from the computer with the listed hostname and MAC
address.
There is no matching DHCP lease for a DHCP client's request
for the specified IP address.
A DHCP client released the specified IP address. The DHCP
client's hostname and MAC address are listed.
The DHCP server feature received a DHCP client's inform
packet and is sending an ACK to the client.
The DHCP server feature assigned a client the IP address that
it requested. The DHCP client's hostname and MAC address
are listed.
Appendix A Log Descriptions
993