Creating/Editing A Web-Based Ssl Application Object - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 48 SSL Application
The following table describes the labels in this screen.
Table 227 Configuration > Object > SSL Application
LABEL
Add
Edit
Remove
Object
Reference
s
#
Name
Address
Type

48.2.1 Creating/Editing a Web-based SSL Application Object

A web-based application allows remote users to access an application via standard
web browsers.
To configure a web-based application, click the Add or Edit button in the SSL
Application screen and select Web Application in the Type field to display the
configuration screen as shown.
Figure 529 Configuration > Object > SSL Application > Add/Edit: Web Application
800
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you
want to remove it before doing so.
Select an entry and click Object References to open a screen that shows
which settings use the entry. See
This field displays the index number.
This field displays the name of the object.
This field displays the IP address/URL of the application server or the location
of a file share.
This field shows whether the object is a file-sharing, web-server, Outlook Web
Access, Virtual Network Computing, or Remote Desktop Protocol SSL
application.
Section 13.3.2 on page 306
ZyWALL USG 100/200 Series User's Guide
for an example.