Ip/Mac Binding Exempt List - ZyXEL Communications ZyWALL USG 200 Series User Manual

The following table describes the labels in this screen.
Table 113 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
Interface
Name
IP Address
MAC Address
Description
OK
Cancel

22.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP
addresses to which the ZyWALL does not apply IP/MAC binding.
Figure 333 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 114 Configuration > Network > IP/MAC Binding > Exempt List
LABEL
Add
Edit
Remove
#
Name
Start IP
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This field displays the name of the interface within the ZyWALL and the
interface's IP address and subnet mask.
Enter the IP address that the ZyWALL is to assign to a device with the
entry's MAC address.
Enter the MAC address of the device to which the ZyWALL assigns the
entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to create a new entry.
Click an entry or select it and click Edit to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
This is the index number of the IP/MAC binding list entry.
Enter a name to help identify this entry.
Enter the first IP address in a range of IP addresses for which the
ZyWALL does not apply IP/MAC binding.
Chapter 22 IP/MAC Binding
443