ZyXEL Communications ZyWALL USG 200 Series User Manual page 343

Unified security gateway
Hide thumbs Also See for ZyWALL USG 200 Series:
Table of Contents

Advertisement

Each field is explained in the following table.
Table 76 Configuration > Network > Interface > VLAN > Edit
LABEL
Show Advance
Settings / Hide
Advance Settings
General Settings
Enable
Interface
Interface
Properties
Interface
Name
Base Port
VLAN ID
Description
IP Address
Assignment
Get
Automatically
Use Fixed IP
Address
IP Address
Subnet Mask
Gateway
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Click this button to display a greater or lesser number of configuration
fields.
Select this to turn this interface on. Clear this to disable this interface.
This field is read-only if you are editing an existing VLAN interface.
Enter the number of the VLAN interface. You can use a number from
0~4094. See
Chapter 57 on page 923
number of VLANs you can configure on the ZyWALL. For example,
vlan0, vlan8, and so on.
Select the Ethernet interface on which the VLAN interface runs.
Enter the VLAN ID. This 12-bit number uniquely identifies each VLAN.
Allowed values are 1 - 4094. (0 and 4095 are reserved.)
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
Select this if this interface is a DHCP client. In this case, the DHCP
server configures the IP address, subnet mask, and gateway
automatically.
You should not select this if the interface is assigned to a VRRP group.
See
Chapter 39 on page
Select this if you want to specify the IP address, subnet mask, and
gateway manually.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address for this interface.
This field is enabled if you select Use Fixed IP Address.
Enter the subnet mask of this interface in dot decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address of the gateway. The ZyWALL sends packets to
the gateway when it does not know how to route the packet to its
destination. The gateway should be on the same network as the
interface.
the User's Guide for the total
characters, and it can be
699.
Chapter 13 Interfaces
343

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 100 series

Table of Contents