ZyXEL Communications ZyWALL USG 200 Series User Manual page 733

To access this screen, go to the Configuration > Object > User/Group >
Setting screen (see
Authentication Timeout Settings section's Edit icons.
Figure 490 Configuration > Object > User/Group > Setting > Edit
The following table describes the labels in this screen.
Table 198 Configuration > Object > User/Group > Setting > Edit
LABEL
User Type
Lease Time
Reauthentication
Time
OK
Cancel
ZyWALL USG 100/200 Series User's Guide
Section 40.4 on page
DESCRIPTION
This read-only field identifies the type of user account for which you
are configuring the default settings.
• admin - this user can look at and change the configuration of the
ZyWALL
• limited-admin - this user can look at the configuration of the
ZyWALL but not to change it
• user - this user has access to the ZyWALL's services but cannot
look at the configuration
• ext-user - this user account is maintained in a remote server, such
as RADIUS or LDAP. See
information about this type.
• ext-group-user - this user account is maintained in a remote
server, such as RADIUS or LDAP. See
page 723 for more information about this type.
Enter the number of minutes this type of user account has to renew
the current session before the user is logged out. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes
unlimited.
Admin users renew the session every time the main screen refreshes
in the Web Configurator. Access users can renew the session by
clicking the Renew button on their screen. If you allow access users
to renew time automatically (see
can select this check box on their screen as well. In this case, the
session is automatically renewed before the lease time expires.
Type the number of minutes this type of user account can be logged
into the ZyWALL in one session before the user has to log in again. You
can specify 1 to 1440 minutes. You can enter 0 to make the number of
minutes unlimited. Unlike Lease Time, the user has no opportunity to
renew the session without logging out.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 40 User/Group
729), and click one of the Default
Ext-User Accounts on page 722
Ext-Group-User Accounts on
Section 40.4 on page
for more
729), the users
733