Zones, Interfaces, And Physical Ports - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 6 Configuration Basics
objects whenever the interface's IP address settings change. For example, if you
change an Ethernet interface's IP address, the ZyWALL automatically updates the
rules or settings that use the interface-based, LAN subnet address object.
You can use the Configuration > Objects screens to create objects before you
configure features that use them. If you are in a screen that uses objects, you can
also usually select Create new Object to be able to configure a new object. For a
list of common objects, see
Use the Object Reference screen
objects are configured and which configuration settings reference specific objects.

6.2 Zones, Interfaces, and Physical Ports

Zones (groups of interfaces and VPN tunnels) simplify security settings. Here is an
overview of zones, interfaces, and physical ports in the ZyWALL.
Figure 54
Zones
Interfaces
Physical Ports
Figure 55 USG 200: Zones, Interfaces, and Physical Ethernet Ports
Zones
Interfaces
Physical Ports
92
Section 6.6 on page
USG 100: Zones, Interfaces, and Physical Ethernet Ports
WAN
wan1 wan2
P1 P2
WAN
wan1 wan2
P1 P2
111.
(Section 3.3.3.3 on page
LAN1
LAN2
lan1
lan2
P3 P4 P5
OPT
LAN1
LAN2
opt
lan1 lan2
P3 P4 P5
ZyWALL USG 100/200 Series User's Guide
57) to see what
WLAN DMZ
dmz
ext-wlan
P6 P7
WLAN DMZ
dmz
ext-wlan
P6 P7