Configure The Authentication Policy - ZyXEL Communications ZyWALL USG 200 Series User Manual

Repeat as needed to create endpoint security objects for other Windows operating
system versions.

7.9.2 Configure the Authentication Policy

Click Configuration > Auth. Policy > Add to open the Endpoint Security Edit
screen. Use this screen to configure an authentication policy to use endpoint
security objects.
• Enable the policy and name it.
• Set the Source Address to LAN1 and the Destination Address to any, the
Schedule set to none, and Authentication set to required to apply this
policy to all users.
• Select Force User Authentication to redirect the HTTP traffic of users who are
not yet logged in to the ZyWALL's login screen.
• Enable EPS checking and move the EPS objects you created to the selected list.
• Click OK.
Figure 117 Configuration > Auth. Policy > Add
ZyWALL USG 100/200 Series User's Guide
Chapter 7 Tutorials
159