ZyXEL Communications ZyWALL USG 200 Series User Manual page 986

Appendix A Log Descriptions
CODE
25
26
27
28
Table 300 Interface Logs
LOG MESSAGE
Interface %s has been
deleted.
AUX Interface dialing
failed. This AUX
interface is not
enabled.
AUX Interface
disconnecting failed.
This AUX interface is
not enabled.
Please type phone
number of interface
AUX first then dial
again.
Please type phone
number of Interface
AUX first then
disconnect again.
Interface %s will
reapply because Device
HA become active
status.
Interface %s will
reapply because Device
HA is not running.
Interface %s will stop
connect because Device
HA become standby
status.
Create interface %s
has been failed.
Base interface %s is
disabled. Interface %s
is disabled now.
Interface %s has been
changed.
Interface %s has been
added.
986
DESCRIPTION
Database method failed due to timeout.
Database method failed.
Path was not verified.
Maximum path length reached.
DESCRIPTION
An administrator deleted an interface. %s is the interface
name.
A user tried to dial the AUX interface, but the AUX interface is
not enabled.
The AUX interface is not enabled and a user tried to use the
disconnect aux command.
A user tried to dial the AUX interface, but the AUX interface
does not have a phone number set.
The AUX interface does not have a phone number set and a
user tried to use the disconnect aux command.
Device-ha became active and is using a PPP base interface,
the PPP interface must reapply, %s is the interface name.
Device-ha was deleted and free PPP base interface, PPP
interface must reapply, %s is the interface name.
When device-ha is stand-by and use PPP base interface, PPP
interface connection will stop, %s: interface name.
When PPP can't running fail, %s: interface name.
When user disable ethernet, vlan or bridge interface and this
interface is base interface of PPP or virtual interface. PPP and
virtual will disable too. 1st %s is interface name, 2nd %s is
interface.
An administrator changed an interface's configuration. %s:
interface name.
An administrator added a new interface. %s: interface name.
ZyWALL USG 100/200 Series User's Guide