The Profile Summary Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 35 ADP
Table 170 Configuration > Anti-X > ADP > General (continued)
LABEL
Status
From, To
Anomaly Profile
Apply
Reset

35.3 The Profile Summary Screen

Use this screen to:
• Create a new profile using an existing base profile
• Edit an existing profile
• Delete an existing profile
632
DESCRIPTION
The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
This is the direction of travel of packets to which an anomaly profile
is bound. Traffic direction is defined by the zone the traffic is coming
from and the zone the traffic is going to.
Use the From field to specify the zone from which the traffic is
coming. Select ZyWALL to specify traffic coming from the ZyWALL
itself.
Use the To field to specify the zone to which the traffic is going.
Select ZyWALL to specify traffic destined for the ZyWALL itself.
From LAN1 To LAN1 means packets traveling from a computer on
one LAN1 subnet to a computer on another LAN1 subnet via the
ZyWALL's LAN1 zone interfaces. The ZyWALL does not check packets
traveling from a LAN1 computer to another LAN1 computer on the
same subnet.
From WAN To WAN means packets that come in from the WAN
zone and the ZyWALL routes back out through the WAN zone.
Note: Depending on your network topology and traffic load,
applying every packet direction to an anomaly profile may
affect the ZyWALL's performance.
An anomaly profile is a set of anomaly rules with configured
activation, log and action settings. This field shows which anomaly
profile is bound to which traffic direction. Select an ADP profile to
apply to the entry's traffic direction. Configure the ADP profiles in the
ADP profile screens.
Click Apply to save your changes.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 100/200 Series User's Guide